Toro E-Z Vac DFS 78556 - 5 Installing the Handle Assembly and Bracket for 48- and 52-Inch Mowers; 6 Installing the Bagger Assembly

3.Installthehandleandbracketassemblytothe
sideofthemachinewith3carriagebolts(3/8x
1-1/4inches)and3angenuts(largeange–3/8
inch)asshowninFigure8.
Note:Ensurethattheboltsgothroughthe
leftbumperandthelowerbaggerbracketand
connectthemtothesideofthemachine.
g009217
Figure8
1.Handleandbracket
assembly
3.Bolt(3/8x1-1/4inches)
2.Flangenut(large
ange–3/8inch)
5
InstallingtheHandle
AssemblyandBracketfor
48-and52-inchMowers
Partsneededforthisprocedure:
1Hoodassembly
1Knob
1
Carriagebolt
Procedure
Pivotthehandleoutintothehandlebracketand
secureitwithacarriageboltandknob(Figure9).
g009418
Figure9
1.Knob
3.Carriagebolt
2.Handlebracket
12