Toro E-Z Vac DFS 78556 - 10 Installing the Discharge Tubes

5.Pullthespring-loadedidlerpulleybackand
routethebeltaroundthemower-deckpulley
(Figure20).
Note:Ensurethatthebeltisroutedaroundthe
blowerpulleyscorrectly
g003399
Figure20
1.Mower-deckpulley3.Blower
2.Spring-loadedIdlerpulley
10
InstallingtheDischarge
Tubes
Partsneededforthisprocedure:
1Uppertube
1Lowertube
3
Bolt(#10x3/4inches)
3
Locknut(#10)
3
Washer(7/32inch)
Procedure
Important:Makesurethatthemowerdeckisin
thelowestheight-of-cutpositionwhileinstalling
thedischargetubes.
Note:Remembertoreplacethegrassdeectorwhen
thebaggerisremovedfromthemower.Referto
InstallingtheGrassDeector(page39).
1.DisengagethePTOandsettheparkingbrake.
2.Stoptheengine,removethekey,andwait
forallmovingpartstostopbeforeleavingthe
operatingposition.
3.Lowerthemowerdecktothelowestheight-of-cut
position.
4.Installtheuppertubeintothebaggeropening
andpullitbackoutsothattherubbersealis
protrudingout(Figure21).
g009223
Figure21
1.Uppertube3.Baggerhood
2.Baggeropening
5.Measurethedistancethetubeisinsidethe
hood.
18