Toro E-Z Vac DFS 78556 - Adjusting the Open Door for 60- and 72-Inch Mowers; Adjusting the Latches for 60- and 72-Inch Mowers; Adjusting the Arm Position for 48- and 52-Inch Mowers

AdjustingtheOpenDoor
for60-and72-inchMowers
Note:Performthisprocedureafteradjustingthedoor
tocompletelyclose.
Adjustthehandlelinktosothatthedooropensas
muchaspossible(Figure48andFigure49).
Note:Lengthenthehandlelinktoopenthedoor
farther.Shortenthehandlelinktoopenthedoorless
Note:Howfarthedooropensiscontrolledbythe
contactarmhittingthestop.Thestopisnotadjustable
andpreventsthedoorfrombeingopenedtoofar.
g009232
Figure48
1.Handle
3.Stop
2.Handlelink
g009218
Figure49
1.Handleassembly
3.Clevis-pinspring
2.Bagger-handlelink
AdjustingtheLatchesfor
60-and72-inchMowers
Note:Adjusttheopendoorandcloseddoorpositions
beforeadjustingthelatches.
1.DisengagethePTO,movethemotion-control
leverstotheNEUTRAL-LOCKEDposition,andset
theparkingbrake.
2.Stoptheengine,removethekey,andwait
forallmovingpartstostopbeforeleavingthe
operatingposition.
3.Closethedoor.
4.Ensurethatthelatchescompletelyengageand
contactsthelatchrodweldedtothedoor(Figure
50).
Note:Thelatchesneedtobetightagainstthe
latchrod.Theyneedtobelooseenoughto
moveorwiggle.
g009222
Figure50
1.Latchlink2.Latchrod
AdjustingtheArmPosition
for48-and52-inchMowers
Theleftandrightbellcrankarmsneedtobeequally
positionedfromtheupperframetubeforproperuse.
1.DisengagethePTO,movethemotion-control
leverstotheNEUTRAL-LOCKEDposition,andset
theparkingbrake.
2.Stoptheengine,removethekey,andwait
forallmovingpartstostopbeforeleavingthe
operatingposition.
3.Removethesideplatefrombothsidesofthe
bagger(Figure51).
35