Toro E-Z Vac DFS 78556 - Adjusting the Closed Door for 48- and 52-Inch Mowers

g007380
Figure51
1.Bolt
3.Sideplate
2.Washer
4.Checkthedistancebetweentheleftandright
bellcranksandtheupperframetube.
Note:Thesedimensionsneedtobethesame
onbothsides.
5.Tomakethedistancesequal,loosenthe
Allen-headboltonthehuboftherightbellcrank
(Figure52).
6.Positionthebellcrankarmsthesamedistance
fromtheupperframetube.
7.TightentheAllen-headboltandinstalltheside
plates.
g007381
Figure52
1.Rightbellcrankarm
3.Distancefromthe
bellcrankarmandupper
frametubeisthesameon
bothsides.
2.Allen-headbolt
4.Upperframetube
AdjustingtheClosedDoor
for48-and52-inchMowers
1.DisengagethePTO,movethemotion-control
leverstotheNEUTRAL-LOCKEDposition,andset
theparkingbrake.
2.Stoptheengine,removethekey,andwait
forallmovingpartstostopbeforeleavingthe
operatingposition.
3.Withthedoorclosed,checkandensurethatitis
slightlytightagainsttheframewhenclosed.
4.Ifadjustmentisneeded,adjustthenuts.
Note:Lengthenthelinkstoreducetheforce.
Shortenthelinkstoincreasetheforce.
Note:Makesurethatboththeleftandright
sidesareadjustedthesamedistance.Withthe
doorclosed,thelinksshouldbeslightlytightto
minimizerattling.
5.Tightenthenuts.
36