Toro GrandStand 72523 - Drive, Hydraulic, and Mower Deck Systems Maintenance

ServicingtheFuses
Theelectricalsystemisprotectedbyfuses.It
requiresnomaintenance.Ifafuseblows,checkthe
componentorcircuitforamalfunctionorshort.
1.Parkthemachineonalevelsurface,disengage
thePTO,andengagetheparkingbrake.
2.Shutofftheengine,removethekey,andwait
forallmovingpartstostopbeforeleavingthe
operatingposition.
3.Releasetheoperatorcushionfromtherearof
themachine.
4.Ifyouneedtoaccessthechargefuse,remove
thefueltank;refertoRemovingtheFuelT ank
(page38).
5.Pulloutthefuseandreplaceit(Figure56).
g301335
Figure56
1.Keyswitchfuse(15A)4.Hourmeter(7.5A)
2.Accessoryport(15A)5.Chargefuse(20A)
3.Power-takeoff(PTO)fuse
(10A)
6.Installthefueltank,ifremoved;referto
RemovingtheFuelT ank(page38).
7.Installtheoperatorcushion.
DriveSystem
Maintenance
AdjustingtheTracking
Ifyoupushbothmotion-controlleversforwardthe
samedistanceandthemachinepullsto1side,adjust
thetrackingasfollows.
1.Parkthemachineonalevelsurface,disengage
thePTO,andengagetheparkingbrake.
2.Shutofftheengine,removethekey,andwait
forallmovingpartstostopbeforeleavingthe
operatingposition.
3.Releasethecushionfromtherearofthe
machine;refertoReleasingtheCushionfor
RearAccess(page27).
Note:Foreasieraccess,youcanalsoremove
thefueltank;refertoRemovingtheFuelT ank
(page38).
4.Rotatetheleftcontrolrodinquarter-turn
incrementsuntilthemachinetracksstraight
(Figure57).
Note:Ifthemachinepullstotheright,shorten
thecontrolrodbyrotatingittotheright.Ifthe
machinepullstotheleft,lengthentherodby
rotatingittotheleft.
Note:Adjustonlytheleftcontrolrodtomatch
theleftwheelspeedtotherightwheelspeed.
Donotadjusttherightwheelspeed,asthis
positionstherightmotion-controlleveroutofthe
centerforthecontrolpanelneutral-lockslot.
Important:Donotrotatethecontrolrodtoo
far,asthismaycausethemachinetocreep
inneutral.
g031531
Figure57
1.Rotatelefttolengthenthe
rod.
3.Rotaterighttoshortenthe
rod.
2.Leftcontrolrod
41