Toro GrandStand 74505 - Uneven Cutting Height; Blades Not Rotating; Clutch Engagement Failure

Problem
PossibleCauseCorrectiveAction
1.Blade(s)arenotsharp.1.Sharpentheblade(s).
2.Cuttingblade(s)is/arebent.2.Installnewcuttingblade(s).
3.Themowerdeckisnotlevel.3.Levelthemowerdeckside-to-side
position.
4.Themowerdeckpitchiswrong.
4.Adjustthefront-to-rearpitch.
5.Theundersideofmowerdeckisdirty.5.Cleantheundersideofthemower
deck.
6.Thetirepressureisnotcorrect.6.Adjustthetirepressure.
Thecuttingheightisuneven.
7.Abladespindleisbent.
7.ContactanAuthorizedServiceDealer.
1.Apumpdrivebeltisworn,looseor
broken.
1.Checkthebelttension.
2.Apumpdrivebeltisoffpulley.
2.Installdrivebeltandcheckadjusting
shaftsandbeltguidesforcorrect
position.
3.Amowerdeckbeltisworn,looseor
broken.
3.Installnewdeckbelt.
4.Amowerdeckbeltisoffpulley.
4.Installdeckpulleyandchecktheidler
pulley,idlerarmandspringforcorrect
positionandfunction.
5.Anidlerspringisbrokenormissing.5.Replacethespring.
6.Theelectricclutchisoutofadjustment.
6.Adjusttheclutchairgap.
7.Theclutchconnectororwireis
damaged.
7.ContactanAuthorizedServiceDealer.
8.Theelectricclutchisdamaged.
8.ContactanAuthorizedServiceDealer.
9.Thesafety-interlocksystemprevents
bladerotation.
9.ContactanAuthorizedServiceDealer.
Thebladesdonotrotate.
10.ThePTOswitchisfaulty.10.ContactanAuthorizedServiceDealer.
1.Thefuseisblown.1.Replacethefuse.Checkthecoil
resistance,batterycharge,charging
system,andwiringconnections,and
replacecomponentsifnecessary.
2.Thereislowvoltagesupplyatthe
clutch.
2.Checkthecoilresistance,battery
charge,chargingsystem,andwiring
connectionsandreplacepartsif
necessary.
3.Thecoilisdamaged.3.Replacetheclutch.
4.Thereisinadequatecurrentsupply.4.Repairorreplacetheclutchlead
wireorelectricalsystem.Cleanthe
connectorcontacts.
Theclutchdoesnotengage.
5.Therotor/armatureairgapistoolarge.
5.Removetheshimorreplacetheclutch.
57