Toro GrandStand 74558 - Operating the Ignition Switch; Using the Speed Control Lever; Using the Fuel Shut-Off Valve

G008959
1
2
Figure10
1.On2.Off
OperatingtheIgnitionSwitch
1.TurntheignitionkeytotheStartposition
(Figure11).Whentheenginesstarts,releasethekey.
Important:Donotengagestarterformore
than5secondsatatime.Iftheenginefails
tostartallowa15secondcool-downperiod
betweenattempts.Failuretofollowthese
instructionscanburnoutthestartermotor.
Note:Additionalstartingcyclesmayberequired
whenstartingtheengineforthersttimeafterthe
fuelsystemhasbeenwithoutfuelcompletely.
START
RUN
ST OP
G008947
Figure11
2.Turntheignitionkeytostoptostoptheengine.
UsingtheSpeedControl
Lever
Thismachinehasaspeedcontrolleverthatsetsthe
speedofthemachine.Thiscanbeadjustedtothe
operator’sdesiredspeed.Itisrecommendedtousethe
slowestspeedfornewoperator’s.
1.Movethespeedcontrollevertosetthedesired
speed.
2.Movethecontrolleverstodrivethemachine.The
controlleversmaybepushedforwardtothefront
referencebarwhilethespeedofthemachineis
controlledbythespeedcontrollever.
Figure12
UsingtheFuelShut-OffValve
Closethefuelshut-offvalvefortransport,maintenance,
andstorage(Figure13).
Ensurethefuelshut-offvalveisopenwhenstarting
theengine.
16