Toro GrandStand Series - Page 100

CHASSIS
3-79Toro GrandStand Service Manual
3
32. Remove nut and lock washer securing the positive
battery cable and red wire eyelet to the solenoid post
(Fig. 0294).
Fig. 0294 DSCN-0984a
33. Remove the green and blue bullet connectors from
the two small studs on the solenoid (Fig. 0295).
Fig. 0295 DSCN-0988a
34. Remove the bolt and washer securing the ground
wires to the engine block (Fig. 0296).
Fig. 0296 DSCN-0991a
35. Disconnect the clutch wires from the wiring harness
(Fig. 0297).
Fig. 0297 DSCN-0993a