Toro GrandStand Series - Page 102

CHASSIS
3-81Toro GrandStand Service Manual
3
40. Remove the speed control cable clip from the speed
control handle assembly (Fig. 0302).
Fig. 0302 DSCN-1010a
41. Remove the “Z” bend of the speed control cable
from the speed control handle assembly (Fig. 0303).
Fig. 0303 DSCN-1015a
42. Remove the four sets of bolts, spacers and nuts
(two sets per side) that secure the axle and wheel
assembly to the carrier frame (Fig. 0304).
Fig. 0304 DSCN-1019a
43. Using two people or a hoist, lift the rear end of the
carrier frame and tower assembly (Fig. 0305).
Fig. 0305 DSCN-1024a