CHASSIS
3-84 Toro GrandStand Service Manual
3
53. Remove the hairpin cotter and washer from the rear
end of the shifter links (Fig. 0314).
Fig. 0314 IMG-9424a
54. 2009 only: Serial range 290000001 - 290000209:
Remove the RH shifter link rod and the 3 rollers
located on the rear end of the shifter link rod from
the inside of the control fork assembly and pump
control arm (Fig. 0315).
Fig. 0315 IMG-9486a
55. 2009 only: Serial range 290000210 - 290999999:
There are 3 rollers located on the rear end of the RH
shifter link rod inside the control fork assembly and
pump control arm. Slide the left hand roller off the
rear end of the RH shifter link rod (Fig. 0316).
Fig. 0316 IMG-9430a
56. 2009 only: Serial range 290000210 - 290999999:
Remove the rear end of the RH shifter link and the
right hand roller (Fig. 0317).
Fig. 0317 IMG-9432a
To Next Page
Loading...
