CHASSIS
3-86 Toro GrandStand Service Manual
3
61. Remove the two thread forming screws and washers
securing the shifter and speed control cable assem-
bly to the engine base (Fig. 0322).
Fig. 0322 DSCN-1042a
62. Remove the shifter and speed control cable as-
sembly (Fig. 0323).
Fig. 0323 DSCN-1043a
63. Remove the three thread forming screws securing
the drive linkage mount assembly to the engine base
(Fig. 0324).
Fig. 0324 DSCN-1049a
64. Remove the drive linkage mount assembly from the
engine base.
65. Using a spring tool, remove the deck idler spring
from the spring anchor (Fig. 0325).
Fig. 0325 DSCN-1050a
To Next Page
Loading...
