Toro GrandStand Series - Page 118

CHASSIS
3-97Toro GrandStand Service Manual
3
21. Place the idler assembly onto the pivot bolt (Fig.
0366).
Fig. 0366 DSCN-1180a
22. Place one friction composite washer and steel
washer onto the pivot bolt (Fig. 0367).
Fig. 0367 DSCN-1185a
23. Secure the idler assembly with a nut (Fig. 0368).
Fig. 0368 DSCN-1190a
24. Position the pumps on the engine base (Fig. 0369).
Fig. 0369 DSCN-1192a