Toro GrandStand Series - Page 121

CHASSIS
3-100 Toro GrandStand Service Manual
3
32. Using a spring tool, secure the mower deck idler
spring to the spring anchor (Fig. 0376).
Fig. 0376 DSCN-1206a
33. Secure the drive linkage mount assembly to the
engine base using three thread forming screws (Fig.
0377).
Fig. 0377 DSCN-1047a
Note: The pump control arm must nest in the center
of the control forks (Fig. 0378).
Fig. 0378 DSCN-1211a