Toro GrandStand Series - Page 139

CHASSIS
3-118 Toro GrandStand Service Manual
3
100. Position the mufer guard assembly and loosely
install the four carriage bolts, two guard mounting
brackets and nuts (Fig. 0445).
Fig. 0445 IMG-0586a
Note: 60” models have a guard panel, not the two
guard mounting brackets (Fig. 0446).
Fig. 0446 DSCN-1471a
101. Make sure the mufer exhaust pipe is centered in
the mufer guard assembly, then tighten all four
bolts and nuts (Fig. 0447).
Fig. 0447 DSCN-0589a