Toro GrandStand Series - Page 158

CHASSIS
3-137Toro GrandStand Service Manual
3
54. Remove the tower assembly from the carrier frame
(Fig. 0518).
Fig. 0518 DSCN-1271a
55. Remove bolt and nut securing the “R” clamp (secur-
ing the low-pressure return line) to the hydraulic
reservoir (Fig. 0519).
Fig. 0519 DSCN-1273a
56. Slide the hose clamp back on the low-pressure
suction line where it connects to the lter inlet tting
(Fig. 0520).
Fig. 0520 DSCN-1318a
57. Remove the two sets of bolts, washers, spacers
and nuts securing the hydraulic reservoir to the tank
mount (Fig. 0521).
Fig. 0521 DSCN-1317a