CHASSIS
3-145Toro GrandStand Service Manual
3
16. Loosely install the two sets of bolts, spacers and
nuts that secure the rear of the tower to the carrier
frame (Fig. 0547).
Fig. 0547 DSCN-1328a
Note: The bolt is installed downwards though the
tower, then down through the carrier frame
(Fig. 0548).
Fig. 0548 DSCN-1331a
17. Tighten all four sets of fastener assemblies.
18. 2010 only: Secure the fuel vent hose to the RH side
of the carrier frame using a cable tie (Fig. 0549).
Fig. 0549 DSCN-1269a
To Next Page
Loading...
