CHASSIS
3-146 Toro GrandStand Service Manual
3
19. Position the brake arm assembly in the carrier frame
(Fig. 0550).
Fig. 0550 DSCN-1332a
20. Position the platform assembly onto the carrier
frame (Fig. 0552).
Fig. 0552 DSCN-1258a
Note: The pivot hole in the platform aligns with the
square hole in the carrier frame (Fig. 0553).
Fig. 0553 DSCN-1337a
Note: Align the square bolt hole in the end of the
brake support with the square bolt hole in the
side of the carrier frame (Fig. 0551).
Note: The brake arm torsion spring will be set in a
later step.
Fig. 0551 DSCN-1336a
To Next Page
Loading...
