Toro GrandStand Series - Page 176

CHASSIS
3-155Toro GrandStand Service Manual
3
54. Secure the speed control cable to the RH control
cable and the lower LH side of the linkage mount
using cable ties (Fig. 0585).
Fig. 0585 DSCN-1414a
55. Secure the rod ends at the base of the control
cables to the control forks using the bolts, spacers
and nuts (Fig. 0586).
Fig. 0586 DSCN-1416a
56. Connect the wire harness to the neutral switch (Fig.
0587).
Fig. 0587 DSCN-1421a
57. Connect the wire harness to the clutch harness (Fig.
0588).
Fig. 0588 DSCN-1423a