Toro GrandStand Series - Page 180

CHASSIS
3-159Toro GrandStand Service Manual
3
67. Position the large washer over the rear cross shaft
stud (Fig. 0600).
Fig. 0600 DSCN-0807a
68. Secure the assembly using the “E” clip (Fig. 0601).
Fig. 0601 DSCN-0808a
69. Repeat steps 64 through 68 on the other side of the
machine.
70. Secure the lower ends of the lift links using the
shoulder bolts, washers, and nuts (Fig. 0602).
Fig. 0602 DSCN-1467a
Note: Install the thin washer between the lift link
and deck bracket (Fig. 0603).
Fig. 0603 DSCN-1469a