Toro GrandStand Series - Page 201

CONTROLS
4-14 Toro GrandStand Service Manual
4
12. Remove the nut and large washer securing the
control fork assembly (Fig. 0680).
14. Remove the shoulder hub and control fork assembly
(Fig. 0682).
Fig. 0680 IMG-1013a
13. Remove the bolt and washer from the shoulder hub
(Fig. 0681).
Fig. 0681 IMG-1015a
Fig. 0682 IMG-1016a
15. Remove the two sets of bolts and nuts securing
the pump control arm to the pump RTN (Return to
Neutral) mechanism (Fig. 0683).
Fig. 0683 IMG-1018a