Toro GrandStand Series - Page 208

CONTROLS
4-21Toro GrandStand Service Manual
4
4. 2009 Only: Remove the hairpin cotter and washer
securing the front end of the LH shifter link to the
shifter bracket (Fig. 0709).
3. Remove the LH motion control cable from the link-
age mount (Fig. 0708).
5. 2010 Only: Remove the bolt, nut, washers, and
spacer securing the front end of the LH shifter link to
the shifter bracket (Fig. 0710).
Fig. 0708 IMG-1035a
Fig. 0709 IMG-9358a
Fig. 0710 IMG-0346_b
6. Remove the hairpin cotter and washer from the rear
end of the shifter link (Fig. 0711).
Fig. 0711 IMG-9361a