Toro GrandStand Series - Page 269

HYDRAULIC DRIVE SYSTEM
6-10 Toro GrandStand Service Manual
6
7. Remove the left pump pulley from the pump shaft
(Fig. 0934).
9. Lower the machine to the ground.
10. Lower the operator cushion assembly and lay it on
the platform.
11. Turn the fuel shut-off valve to the OFF position (Fig.
0936).
Fig. 0934 IMG-9465a
8. Remove the key from the pump shaft keyway (Fig.
0935).
Fig. 0935 IMG-9277a
Fig. 0936 IMG-9283a