Toro GrandStand Series - Page 277

HYDRAULIC DRIVE SYSTEM
6-18 Toro GrandStand Service Manual
6
41. Serial range 290000210 - 290999999: Remove the
front end of the left hand shifter link rod. There are 3
rollers located on the rear end of the left hand shifter
link rod inside the control fork assembly. Slide the
left hand roller off the rear end of the left hand shifter
link rod (Fig. 0966).
Fig. 0966 IMG-9365a
40. Serial range 290000001 - 290000209: Remove the
left hand shifter link rod and the 3 rollers located on
the rear end of the shifter rod inside the control fork
assembly (Fig. 0965).
Fig. 0965 IMG-9373a
42. Serial range 290000210 - 290999999: Remove the
rear end of the left hand shifter link rod and the right
hand roller (Fig. 0967).
Fig. 0967 IMG-9367a
39. Remove the hairpin cotter and washer from the rear
end of the left hand shifter link rod (Fig. 0964).
Fig. 0964 IMG-9361a