Toro GrandStand Series - Page 279

HYDRAULIC DRIVE SYSTEM
6-20 Toro GrandStand Service Manual
6
48. Remove the 2 high pressure hoses (Fig. 0974).
Fig. 0974 IMG-9383a
47. Slide the hose clamp back from the tting and re-
move the return line (Fig. 0973).
Fig. 0973 IMG-9381a
49. Remove the 2 carriage bolts, nuts, and washers
securing the pump to the frame (Fig. 0975).
Fig. 0975 IMG-9386a
46. Slide the hose clamp back from the tting and re-
move the charge line (Fig. 0972).
Fig. 0972 IMG-9380a