Toro GrandStand Series - Page 282

HYDRAULIC DRIVE SYSTEM
6-23Toro GrandStand Service Manual
6
b. Install the return line and secure with the hose
clamp (Fig. 0983)
Fig. 0983 IMG-9397a
c. Install the charge line and secure with the hose
clamp (Fig. 0984)
Fig. 0984 IMG-9398
5. Serial range 290000001 - 290000209: Slide 3
rollers onto the rear end of the left hand shifter link
rod. Slide the rear end of the shifter link rod (with 3
rollers) into the control fork assembly (Fig. 0986).
Fig. 0986 IMG-9373a
Shifter Link and Roller Congurations (Fig. 0985):
A. 2009: Serial range 290000001-290000210;
3 rollers, all thin and same size
B. 2009: Serial range 290000211-290999999;
3 rollers, large center roller
C. 2010: Serial range 310000001-310999999;
3 rollers, all large and same size
Fig. 0985 IMG-0941a
A
B
C