Toro GrandStand Series - Page 295

HYDRAULIC DRIVE SYSTEM
6-36 Toro GrandStand Service Manual
6
5. Remove the pump belt from around the pump
pulleys (Fig. 1031).
Fig. 1031 IMG-9274a
6. Remove the 2 set screws from the right pump pulley
(Fig. 1032).
Fig. 1032 IMG-9475a
7. Remove the right pump pulley from the pump shaft
(Fig. 1033).
Fig. 1033 IMG-9480a
8. Remove the key from the pump shaft keyway (Fig.
1034).
Fig. 1034 IMG-9535a