Toro GrandStand Series - Page 299

HYDRAULIC DRIVE SYSTEM
6-40 Toro GrandStand Service Manual
6
21. Remove the fuel tank from the machine (Fig. 1045).
Fig. 1045 IMG-9307a
22. Remove the 3 push cable ties by driving them
through the tower frame (Fig. 1046).
Fig. 1046 IMG-9314a
23. Loosen the nut and bolt securing the strike plate to
the tower 2 full turns to gain access to the bolt below
it (Fig. 1047).
Fig. 1047 IMG-9316a
24. Remove the bolt and nut securing the fuel line
r-clamp to the frame (Fig. 1048).
Fig. 1048 IMG-9329a