Toro GrandStand Series - Page 305

HYDRAULIC DRIVE SYSTEM
6-46 Toro GrandStand Service Manual
6
45. Mark the hydraulic pump, ttings and lines (Fig.
1070).
1) Charge line
2) Return line
3) High pressure hose
4) High pressure hose
Fig. 1070 IMG-9440a
46. Slide the hose clamp back from the tting and
remove the return line (Fig. 1071).
Fig. 1071 IMG-9442a
47. Slide the hose clamp back from the tting and re-
move the charge line (Fig. 1072).
Fig. 1072 IMG-9447a
Shifter Link and Roller Congurations (Fig. 1069):
A. 2009: Serial range 290000001-290000210;
3 rollers, all thin and same size
B. 2009: Serial range 290000211-290999999;
3 rollers, large center roller
C. 2010: Serial range 310000001-310999999;
3 rollers, all large and same size
Fig. 1069 IMG-0941a
A
B
C