Toro GrandStand Series - Page 306

HYDRAULIC DRIVE SYSTEM
6-47Toro GrandStand Service Manual
6
48. Remove both high pressure hoses (Fig. 1073).
Fig. 1073 IMG-9448a
49. Remove the 2 carriage bolts, nuts, and washers
securing the pump to the frame (Fig. 1074).
Fig. 1074 IMG-9457a
50. Remove the right hand pump (Fig. 1075).
Fig. 1075 IMG-9483a
51. Remove the 2 bolts and nuts securing the pump
control arm to the pump. Remove the pump control
arm (Fig. 1076).
Fig. 1076 IMG-9391a