CHASSIS
3-10 Toro GrandStand Service Manual
3
Height of Cut (HOC) Handle Assembly
Replacement
HOC Handle Assembly Removal
1. Lower the deck onto two boards to support the
weight of the deck assembly (Fig. 0033).
3. 2010 only: Remove the dampener assembly from
the base of the lift bar (Fig. 0035).
Fig. 0033 IMG-1373a
2. 2009 only: Remove the nut at the base of the lift
bar (Fig. 0034).
Fig. 0034 DSCN-0274a
Fig. 0035 DSCN-0272a
4. Remove the shoulder bolt, washer and spring
securing the height of cut (HOC) lever to the HOC
handle assembly (Fig. 0036).
Fig. 0036 DSCN-0280a
To Next Page
Loading...
