CHASSIS
3-11Toro GrandStand Service Manual
3
5. Remove the HOC lever through the slot in the
control panel (Fig. 0037).
7. Remove the two sets of bolts, nuts and spacers
securing the HOC bracket to the side of the control
tower (Fig. 0039).
Fig. 0037 DSCN-0283a
6. Remove the “E” clip that secures the pivot hub in the
HOC handle assembly (Fig. 0038).
Fig. 0038 DSCN-0285a
Fig. 0039 DSCN-0284a
8. Remove the carriage bolt and nut securing the HOC
handle assembly to the control tower (Fig. 0040).
Fig. 0040 DSCN-0288a
To Next Page
Loading...
