Toro GrandStand Series - Page 335

HYDRAULIC DRIVE SYSTEM
6-76 Toro GrandStand Service Manual
6
2. Move the hose clamp from the tank tting so the low
pressure return hose can be removed (Fig. 1179).
Fig. 1179 IMG-0822a
3. Position a drain pan under the reservoir tank. Re-
move the low pressure return line from the tank
tting and drain the uid into the pan (Fig. 1180).
Fig. 1180 IMG-0829a
4. Move the hose clamp from the lter tting so the
hose can be removed (Fig. 1181).
Note: Due to the short length, remove the hose from
the lter tting as the tank is removed.
Fig. 1181 IMG-0832a
5. Remove the two sets of bolts, nuts, washers and
spacers securing the reservoir tank to the tank
bracket (Fig. 1182).
Fig. 1182 IMG-0834a