Toro GrandStand Series - Page 337

HYDRAULIC DRIVE SYSTEM
6-78 Toro GrandStand Service Manual
6
10. Remove the tting from the reservoir tank (Fig.
1187).
Fig. 1187 IMG-0843a
11. Remove the o-ring from the tting (Fig. 1188).
Fig. 1188 IMG-0854a
12. Loosen the jam nut securing the position of the 90
degree tting (Fig. 1189).
Fig. 1189 IMG-0844a
13. Remove the tting from the reservoir tank (Fig.
1190).
Fig. 1190 IMG-0846a