Toro GrandStand Series - Page 365

MOWER DECK
7-10 Toro GrandStand Service Manual
7
4. Slide the blade bolt through the blade (Fig. 1275).
Fig. 1275 IMG-9827a
5. Install the blade, blade bolt and washer onto the
spindle assembly (Fig. 1276).
Fig. 1276 IMG-9830a
6. Block the blade and torque the blade bolt to 85 -
110 ft-lbs. (115 - 149 Nm) (Fig. 1277).
Fig. 1277 IMG-9833a
7. Position the pulley on the spindle housing assembly
(Fig. 1278).
Fig. 1278 IMG-9773a