MOWER DECK
7-11Toro GrandStand Service Manual
7
8. With the blade blocked, secure the belt pulley to the
top of the spindle housing assembly with the 3 bolts
(Fig. 1279).
Fig. 1279 IMG-9770a
9. Grease the spindle assembly with No. 2 general
purpose lithium base or molybdenum base grease
until grease begins to ooze out of the bearings. (Fig.
1280).
Fig. 1280 IMG-9835a
10. With two people, lower the front of the mower to the
ground.
11. Position the battery onto the battery tray (Fig. 1281).
Fig. 1281 IMG-9660a
12. Install the positive (red) battery cable to the positive
(+) battery terminal and slide the red boot over the
positive (red) battery terminal connection. (Fig.
1282).
Fig. 1282 IMG-9662a
To Next Page
Loading...
