MOWER DECK
7-13Toro GrandStand Service Manual
7
17. Lower the mower deck to the lowest height-of-cut
(Fig. 1287).
Fig. 1287 IMG-9676a
18. Route the mower deck belt around the mower deck
pulleys and clutch pulley. Refer to the belt routing
decal (Fig. 1288):
Fig. 1288 g. 1 117-0486
19. Using a ratchet in the idler arm, tension the arm until
the spring is stretched 5-3/4” (14.6cm) from hook to
hook, then tighten the nut (Fig. 1289):
Fig. 1289 g. 61 G009460
A. 5-3/4” (14.6cm) from D. Ratchet
hook to hook E. Square hole for ratchet
B. Spring F. Nut
C. Spring loaded idler
A
B
D E F
C
To Next Page
Loading...
