MOWER DECK
7-32 Toro GrandStand Service Manual
7
Discharge Bafe Installation
3. Remove the two thread forming screws retaining the
discharge bafe to the deck (Fig. 1358).
1. Secure the discharge bafe with two thread forming
screws (Fig. 1360).
Fig. 1358 IMG-0791a
4. Remove the discharge bafe from the underside of
the mower deck (Fig. 1359).
Fig. 1359 IMG-0680a
Fig. 1360 IMG-0791a
2. Install two nuts to the thread forming screws
retaining the discharge bafe to the mower deck
(Fig. 1361).
Fig. 1361 IMG-0674a