MOWER DECK
7-34 Toro GrandStand Service Manual
7
Anti-Scalp Roller Replacement (60”
Models Only)
Skid Plate Installation
Single Anti-Scalp Roller Removal
1. Position the skid plate into the mower deck (Fig.
1365).
1. Remove the nut from the roller axle bolt (Fig. 1367).
Fig. 1365 IMG-0504a
2. Secure the skid plate to the mower deck with three
carriage bolts and nuts (Fig. 1366).
Fig. 1366 IMG-0503a
Fig. 1367 IMG-0692a
2. Remove the axle bolt and roller assembly from the
wheel bracket (Fig. 1368).
Fig. 1368 IMG-0693a
To Next Page
Loading...
