Toro GrandStand Series - Page 41

CHASSIS
3-20 Toro GrandStand Service Manual
3
Caster Wheel Assembly Installation
1. Pack the caster wheel tapered roller bearing with
high temperature grease (Fig. 0073).
14. Remove the LH and RH tapered bearings (Fig.
0072).
Fig. 0072 DSCN-0389a
Fig. 0073 DSCN-0407a
2. Install the bearing into the wheel hub (Fig. 0074).
Fig. 0074 DSCN-0389a
13. Remove the grease seal from both sides of the
caster wheel (Fig. 0071).
Fig. 0071 DSCN-0387a