Toro GrandStand Series - Page 427

ELECTRICAL
8-18 Toro GrandStand Service Manual
8
19. Remove the 3 carriage bolts and 3 nuts securing the
skid plate to the mower deck (Fig. 1474).
21. Disconnect the clutch wire connector from the wire
harness and push the clutch connector and grommet
through to the bottom side of the engine base (Fig.
1476).
Fig. 1474 IMG-9600a
20. Remove the skid plate (Fig. 1475).
Fig. 1475 IMG-9601a
Fig. 1476 IMG-9599a