ELECTRICAL
8-42 Toro GrandStand Service Manual
8
Hour Meter/Control Module Installation
1. Install the hour meter into the control panel. Ensure
that the mounting clips have secured the switch in
the control panel (Fig. 1560).
Fig. 1560 IMG-1252a
Note: The hour meter must be orientated so it can
be read from the front of the machine (Fig.
1561).
Fig. 1561 IMG-1254a
2. Install the wire harness to the back of the hour meter
(Fig. 1562).
Fig. 1562 IMG-1247a
To Next Page
Loading...
