Toro GrandStand Series - Fuel Tank Assembly Replacement

CHASSIS
3-26 Toro GrandStand Service Manual
3
Fuel Tank Assembly Replacement
Fuel Tank Assembly Removal
23. Install the grease cap onto the top of the pivot hub
(Fig. 0095).
1. Turn the fuel shutoff valve to the “OFF” position (Fig.
0096).
Fig. 0095 DSCN-0357a
Fig. 0096 DSCN-0457a
2. Siphon the fuel from the fuel tank.
Note: The only recommended way to remove the
fuel from the tank is by using a siphon pump.
3. Remove the height of cut (HOC) pin and lower the
deck (Fig. 0097).
Fig. 0097 DSCN-0459a