Toro GrandStand Series - Page 55

CHASSIS
3-34 Toro GrandStand Service Manual
3
Platform & Cushion Assembly Installation
9. Remove the four nuts securing the four rubber
bumpers to the platform (Fig. 0125).
1. Secure the four rubber bumpers to the platform
using four nuts (Fig. 0126).
Fig. 0125 DSCN-0505a
Fig. 0126 DSCN-0505a
2. Position the spring on the latch pin (Fig. 0127).
Fig. 0127 DSCN-0512a