CHASSIS
3-36 Toro GrandStand Service Manual
3
7. Position the friction washer, then the pad link over
the spacer (Fig. 0132).
9. Repeat steps 6, 7, and 8 on the other side.
10. Position the carriage bolt through the brake support
and the carrier frame (Fig. 0134).
Fig. 0132 DSCN-0549a
8. Secure the assembly with a washer and nut (Fig.
0133).
Fig. 0133 DSCN-0555a
Fig. 0134 DSCN-0531a
11. Position a washer over the carriage bolt (Fig. 0135).
Fig. 0135 DSCN-0562a
To Next Page
Loading...
