TEST HOOK UP NO. 4 (continued)
TEST B: REEL DRIVE RELIEF SETTING AND REEL MOTOR EFFICIENCY
PROCEDURE
With engine off, insert a block of wood between cutting unit reel blades and front cross
tube to prevent reel from turning.
Engine RPM 2800.
Hydraulic oil at operating temperature.
Engage mow pedal.
TESTER READINGS
Flow not more than 0.5 GPM at 2000 to 2100 PSI.
If flow is above 0.5 GPM, remove motor and repair as necessary.
If pressure is is not in listed range, remove relief valve controlling reel being checked
and examine for wear or contamination.
Testing Page 4 - 34 Greensmaster
®
3100
To Next Page
Loading...
