Toro Greensmaster 3120 - Page 135

InstallingtheTractionPump(continued)
5.Makesuretwo(2)spacers(item26inFigure56)aretintotheholesofthe
rubbercouplerandsecurethepumphubtotherubbercouplerwithtwo(2)
hexnuts,atwashers,andlocknuts.
6.Connectthetractioncontrolcable:
A.Securethetractioncableballjointtothecablebracket.
B.Securethecontrolcabletothecablesupportwiththejamnutsonthe
cable.Makesurethatawasherispositionedoneachsideofthecable
support.
7.Removetheplugsandthecapsfromhydraulichosesandttingsandusing
labelsplacedduringtractionpumpremoval,connectthehydraulichoses
tothetractionpumpttings.Tightentheconnectionsasspecied;referto
InstallingHydraulicHosesandTubes(O-RingFaceSeal)(page4–8).
8.Installthegearpump;refertoInstallingtheGearPump(page4–82).
Greensmaster3120
Page4–89
HydraulicSystem:ServiceandRepairs
17230SLRevC