Toro Greensmaster 3150 Series - Installing the Bedknife; Bedknife Specifications

InstallingtheBedknife
1.Removetherust,scale,andcorrosionfromthe
bedbarsurfaceandapplyathinlayerofoilto
thebedbarsurface.
2.Cleanthescrewthreads.
3.Applythread-lockingcompoundtothescrews
andinstallthebedknifetothebedbar.
g255045
Figure27
1.Bedbar
3.Screw
2.Bedknife
4.Torquethe2outerscrewsto1N∙m(10in-lb).
5.Workingformthecenterofthebedknife,torque
thescrewsto23to28N∙m(200to250in-lb).
g255046
Figure28
1.Bednifescrewtool
3.Torqueto23to28N∙m
(200to250in-lb).
2.Installandtorquethese
rstto1N∙m(10in-lb).
6.Grindthebedknife.
BedknifeSpecications
BedknifeScrews
Torque:23to28N∙m(200to250in-lb)
Installationtool:TOR510880
Installationorder:
g254874
Figure29
BedknifeGrindingSpecications
g032182
Figure30
1.Reliefangle4.Frontface
2.Topface
5.Frontangle
3.Removeburr
16