Toro Greensmaster Flex 1820 - Height Adjuster Assembly

HeightAdjusterAssembly
g324624
Figure12
1.Heightadjusterknob8.Flangenut
2.Carriagebolt
9.Heightadjustmentrod
3.Height-of-cutbracket10.Groomerpin
4.Flangenut
11.Quickuplever
5.Groomerhose12.Quickupcover
6.Washer(2each)
13.Detentspring
7.Compressionspring
14.Button-headscrew
Note:Earlyuniversalgroomersused2compressionspringsonnon-adjustable
heightadjustmentrods.Retrottingtheassembliesoneachsideofthecutting
unitwithnewcompressionsprings,heightadjustmentrods,andaddingange
nutstoenablespringadjustmentisrecommended(Figure12).
DisassemblingtheHeightAdjusterAssembly
1.Parkthemachineonacleanandlevelsurface,lowerthecuttingunits
completelytotheground,settheparkingbrake,andremovethekeyfromthe
keyswitch.
2.Removethecotterpinsandclevispinsthatsecuretheheightadjustment
rodstothegroomergearboxandidlerarm.Discardthecotterpins.
3.Loosenthe2heightadjustmentbolts(item15inFigure12)and2locknuts.
4.Removetheangenut(item4inFigure12)andcarriageboltthatsecurethe
heightadjusterassemblytothecuttingunitsideplate,andremovethefront
rollerandheightadjusterfromthecuttingunit.
5.Disassembletheheightadjusterassembly(Figure12).
6.Cleanallthecomponentsandinspectforwearordamage.Replaceallthe
componentsthatarewornordamaged.
UniversalGroomer(Optional):ServiceandRepairs
Page9–22
GreensmasterFlex1800/1820/2100/2120
12188SLRevD