Greensmaster Flex 1800/1820/2100/2120Page 3 − 4Engine
General Information
This Chapter gives information about specifications,
maintenance, troubleshooting, testing and repair of the
Subaru gasoline engine used on the Greensmaster Flex
1800/1820/2100 and 2120 mowers.
Most repairs and adjustments require tools which are
commonly available in many service shops. Several
special tools are described in the Subaru Service Manu-
al. The use of some specialized test equipment is ex-
plained. However, the cost of the test equipment and the
specialized nature of some repairs may dictate that the
work be done at an engine repair facility.
Service and repair parts for the Subaru engine used on
Greensmaster Flex mowers are supplied through your
local Toro distributor. Be prepared to provide your dis-
tributor with the Toro model and serial number.
Operator’s Manual
The Operator’s Manual provides information regarding
the operation, general maintenance and maintenance
intervals for your Greensmaster machine. Refer to the
Operator’s Manual for additional information when ser-
vicing the machine.
Fuel Evaporative Control System
To meet worldwide emission requirements, the engine
that powers your Flex mower is equipped with a fuel cap
that has an integrated carbon canister. This fuel cap
captures fuel vapors from the fuel tank prior to venting
to atmosphere.
To prevent saturating the carbon cannister in the fuel
cap, it is important to make sure that the fuel tank is not
overfilled. The recommended level for a full fuel tank is
flush with the top of the plastic fill screen in the tank. Do
not overfill the tank when refueling.
To Next Page
Loading...
