Toro Greensmaster Flex 2100 - Clutch Assembly Service (1800;2100)

Greensmaster Flex 1800/1820/2100/2120Traction and Reel Drive System Page 4 − 38
Clutch Assembly Service (1800/2100)
1. Retaining ring (3 used)
2. Retaining ring
3. Shim (6 used)
4. Ball bearing (2 used)
5. Mounting plate
6. Shim (2 used)
7. Spring cup
8. Wave spring
9. Oil seal
10. Thrust friction assembly
11. Retaining ring
12. Ball bearing
13. Rotating housing
14. Hub
15. Airgap cover
16. Fixed drive insert (6 used)
17. Fixed housing
18. Retaining ring
Figure 47
2
3
6
8
9
10
11
13
1
5
7
12
14
15
16
17
18
4
1
1
3
4
6
NOTE: Mounting plate (item 5), thrust friction assembly
(item 10), rotating housing (item 13), hub (item 14), drive
inserts (item 16) and fixed housing (item 17) are not
available separately. If any of these clutch components
are worn or damaged, replace complete clutch assem-
bly.
Clutch Inspection
1. Before disassembling clutch, measure rotation
angle of clutch lever (Fig. 48). If lever can be rotated
more than 22
o
, the clutch assembly is worn and clutch
replacement is necessary.
Figure 48
ENGAGE
10
22
o
New Clutch Assembly
o
Worn Clutch Assembly